Blueprinter M3

We have produced amazing results from the Blueprinter M2, The New Blueprinter M3, low-noise with clean lines and more power. The Danish 3D printing pioneers launch the next generation of the Blueprinter.

The M3 is user-friendly and makes no more noise than your standard 2D printer.

The Blueprinter utilizes the unique SHS (Selective Heat Sintering) technique to fuse layers of thermoplastic powder. SHS uses thermal print heads to selectively sinter each layer of powder one layer at a time to build a full bed of printed parts. Powder based printing technology gives the freedom to build almost any shape without the concern of support structures. Parts can be packed and stacked in the volume to optimise the build for the most efficient 3D printing.

SHS technology is the most affordable way of producing thermoplastic powder 3D prints. It is the lowest cost printer in it class and with a 90% recycle rate of powder the cost per part is significantly lower than similar technologies.

Blueprinters thermoplastic powder produces high quality prototype parts that are accurate, strong, flexible and stable. Blueprinter parts are perfectly suited to a wide range of industries, such as manufacturing, engineering, industrial design, art and education. Parts are used for applications that require flexible clips, locating features, bosses, complex geometries and much more.

The Blueprinter is perfect for use in the office so is perfect for small companies or departments within larger organisations. To find out more about this revolutionary technology or get a quotation for your requirements please contact us.

Every industry should have a Blueprinter

Developed, produced and designed in Denmark. Blueprinter produces an office friendly 3D printer that enables millions of CAD users to produce their own prototypes – fast, easily and at low cost.


Blueprinter makes 3D printing affordable. The cost of professional high quality 3D printing has been drastically reduced: Average cost pr. print: 0,18 EUR pr. cm

Office friendly

Blueprinter is designed to be installed in the office. Printer dimen­sions: 113 x 50,5 x 59 cm.

Easy to operate

100% web based software makes 3D printing as easy as traditional 2D printing.

New technology

The Selective Heat Sintering™ (SHS™) technology uses a low cost commercial thermal print head as opposed to expensive lasers.

Ready-to use

Load and press Print when Ready. Blueprinter is ready for use five minutes after finishing the previous 3D print.

Free forming

Blueprinter works by applying heat on layers of thermoplastic powder, allowing the free forming of any complex geometrical shape with the, minimum wall thickness of 1 mm.

Reusable economic material

Thermoplastic powder optimized to work with SHS™ technology. Monocrome white. Excess powder is re-usable. No need for additional support materials, models are supported by the powder in the build chamber.

Low cost thermal print head

SHS™ technology uses a low cost commercial thermal print head as opposed to expensive lasers.