Zortrax M300 Dual FDM 3D Printer

The LPD Plus technology designed for BIG industrial-grade results.

Zortrax M300 Dual Main Features

  • Works in the LPD Plus dual-extrusion technology
  • Has a 265x265x300 mm workspace
  • Has Wi-Fi, USB, and Ethernet connectivity
  • Has a blackout response system
  • Calibrates a build-platform with a capacitive displacement sensor
  • Compatible with various build platforms
  • Supports single and dual extrusion modes
  • Works with third-party filaments

contact us Buy Now

Phone

03 9687 8638

Address

Factory 31, 91 Moreland Street,
Footscray, VIC 3011
Australia.

Send a Message

Print as you want

Various types of build platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows choosing the setup perfectly tailored to the task at hand.

Minimizing human error

The M300 Dual is an efficient time-saving device fitted with advanced sensors to oversee the 3D printing process from start to finish with almost no supervision required.

No more failed prints

The printer can reduce time lost due to power outages and various kinds of mechanical failures. In such cases the print is automatically paused and can be resumed right after the issue has been dealt with.

Industrial-quality results from
desktop 3D printer

Large workspace

Its large workspace measuring 265x265x300 mm is sufficient to print big models in one go.

Dual-extrusion system

The LPD Plus technology works with two nozzles and a double hot-end.

Blackout response system

The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.

Capacitive sensor

The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.

Advanced filament control

The M300 Dual automatically pauses the print when the filament’s jammed, run out, or when the nozzle got clogged.

External materials support

Third-party filaments available on spools are fully supported in both single and dual extrusion modes.

 

Large format models made with a desktop-sized 3D printer

Step 1 Design

You can design models in all types of CAD software that support exporting files to .stl and .obj format or simply download them from the many online libraries.

Step 2 Print

Z-SUITE can send an already pre-processed model to one or more of your printers over Wi-Fi or Ethernet network.

Step 3 Remove supports

Water-soluble support filaments can be easily removed by rinsing. A dedicated Z-SUPPORT Premium dissolves quickly and leaves no remnants on the model.

Step 4 Go forward

Once the supports are removed, the model can work as a functional prototype or an end-use part in various industries.

Scaling up to 3D printing farms

The Zortrax M300 Dual’s wireless connectivity enables you to build a large cluster of remotely controlled 3D printers. Besides Wi-Fi, multiple M300 Dual 3D printers can also be networked through Ethernet or USB ports.

Connect

3D printing networks can be made by connecting multiple printers into large manufacturing clusters.

Manage

Z-SUITE is an efficient 3D printing farm management tool. 3D printers can be chosen to divide the workload between the devices.

Check

Monitor the 3D printing process using cameras installed inside each one of the printers.

Main features of Z-SUITE 2 for dual-extrusion technology

Z-SUITE is a dedicated slicing application that also works as a wireless command center of smart, reliable Zortrax 3D printers with Wi-Fi capability. It has a variety of functionalities enhancing the experience of using Zortrax M300 Dual.

Raft-free 3D printing

Z-SUITE 2 supports raft-free 3D printing. A glass build platform is recommended for this option.

Rotation optimization tool

The model’s position on the build-platform can be optimized to reduce support or printing time.

Replication

Models can be a easily replicated to fit multiple parts of the same design on the build platform.

Thin wall detection

Z-SUITE 2 highlights the walls too thin to be printed properly to prevent failed prints.

Specifications for the Zortrax M300 Dual

Device features

Build volume265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)
Material containerSpool
Material diameter1.75 mm (0.069 in)
Nozzle diameter0.4 mm (0.016 in)
ExtruderDual material extruder with material jam detection
Extruder cooling systemTwo fans cooling the extruder; radial fan cooling the print
HotendDual material hotend
PlatformHeated; Perforated/Glass
Material Endstop2 x Mechanical endstop
ConnectivityWi-Fi, Ethernet, USB
Operation systemAndroid
ProcessorQuad Core
Touchscreen4″ IPS 800×480
CameraYes

Electrical

AC input110 V ~ 5,9 A 50/60 Hz ; 240 V ~ 2,5 A 50/60 Hz
Maximum power consumption400 W

Software

Software bundleZ-SUITE
Supported file types.stl, .obj, .dxf, .3mf
Supported operating systemsMac OS X / Windows 7 and newer versions

In the Box

3D Printer, Side Covers, Z-SUITE, Starter Kit, 1 spools of model material, 1 spool of support material, 2 spoolholders, Material Box, 1 perforated platform, 1 glass platform

Printing

TechnologyLPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures
Layer resolution100 – 300 microns (for 0.4 mm 0.016 in nozzle)
Minimal wall thickness400 microns (for 0.4 mm 0.016 in nozzle)
Platform levelingAutomatic measurement of platform points height / manual measurement of platform points height

Temperature

Maximum printing temperature (extruder)310° C (590° F)
Maximum platform temperature105° C (221° F)
Ambient operation temperature20 – 30° C (68- 86° F)
Storage temperature0 – 35° C (32- 95° F)

Filaments

Dedicated filamentsZ-NYLON, Z-ABS, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA, Z-ULTRAT PLUS, Z-SUPPORT PREMIUM
External filamentsApplicable
SupportMechanically removed – printed with the same material as the model / Dissolvable – printed with a different material than the model
Filament containerSpool
Filament diameter1.75 mm (0.069 in)

Zortrax 3D Printers

  • Zortrax M200
    Zortrax M200 FDM 3D printer The Zortrax M200 3D printer is fitted with...
    Read More
  • Zortrax M200 Plus
    Zortrax M200 Plus FDM 3D Printer Zortrax M200 Plus is a...
    Read More
  • Zortrax M300
    The Zortrax M300 FDM Printer is no longer available.  It has been...
    Read More
  • Zortrax Inventure
    Zortrax Inventure FDM 3D Printer The Zortrax Inventure is a smart affordable 3D...
    Read More
  • Zortrax M300 Plus
    Zortrax M300 Plus FDM 3D Printer Zortrax M300 Plus is a large build...
    Read More

Want To Know More?

Our team of 3D printing professionals are just an email or a phone call away.

contact us

Phone

03 9687 8638

Address

Factory 31, 91 Moreland Street,
Footscray, VIC 3011
Australia.

Send a Message