Impacts of current Victorian COVID Restrictions: we are still open for business and able to provide product sales and services in line with the Victorian Government COVID Safe criteria.

Please refer to our COVID-19 FAQs.

Formlabs Fuse Sift

All-In-One Powder Recovery for the Fuse 1

The Fuse Sift is a safe, efficient powder recovery system for the Fuse 1. This all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device. Highly convenient and compact, this is the most functionality you’ll get in a single device on the SLS market.

The best sidekick an SLS 3D printer could ask for

The Fuse 1 is an affordable, intuitive SLS 3D printer for strong, durable nylon parts. The Fuse Sift completes the Fuse 1 workflow.

contact us

Phone

03 9687 8638

Address

7A Kent St,
Yarraville, VIC 3013
Australia.

Send a Message


    (Accepted filetypes: pdf,jpg,jpeg,png & gif. Max file size: 5mb)

    Compact, enclosed system

    A negative air pressure system keeps powder inside while enabling open access and easy cleanup.

    Dimensions: 1.0 × 0.6 × 1.5 m (39.9 × 24.0 × 60.8 in)

    Low waste

    A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints.

    Automatic powder mixing

    Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.

    Nonstop printing

    Reduce downtime by transferring modular build chambers and powder cartridges between the Fuse 1 and Fuse Sift for a nonstop, cyclical workflow.

    A complete toolkit

    The Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.

    • Large Brush
    • Small Brush x 2
    • Pipe Cleaners
    • Dental Picks
    • Vacuum Brush Tool
    • Vacuum Crevice Tool

    Formlabs Fuse Sift Technical Specifications

    Printer Compatibility Fuse 1
    Dimensions 99.1 × 61.0 × 188.8 cm
    39.0 × 24.0 × 61.8 in
    Height when open: 190 cm (75 in)
    Fuse Sift Dimensions
    (W × D × H)
    99.1 × 61.0 × 188.8 cm
    39.0 × 24.0 × 61.8 in
    Build Chamber Dimensions
    (W × D × H)
    27.9 × 34.2 × 48.9 cm
    11.0 × 13.5 × 19.3 in
    Minimum Access Dimensions
    (W × D × H)
    221.1 × 122.0 × 218.0 cm
    87.1 × 48.0 × 85.8 in
    Fuse Sift Weight 93 kg (without build chamber or powder)
    205 lb (without build chamber or powder)
    Build Chamber Weight 11 kg (17.6 kg, full with 20% packed powder)
    24.3 lb (38.8 lb, full with 20% packed powder)
    Air Filtration Technology Replaceable HEPA filter
    Build Volume
    (W × D × H)
    16.5 x 16.5 x 30.0 cm (with radiused corners)
    6.5 × 6.5 × 11.8 in (with radiused corners)
    Fresh Powder Hopper Capacity 10.7 kg Nylon 12
    23.6 lb Nylon 12
    Used Powder Hopper Capacity 9.8 kg Nylon 12
    21.6 lb Nylon 12
    Operating Environment 18 – 26 ºC
    68 – 80 ºF
    ≤ 30% ambient humidity
    Air Handling Negatively pressurized hood with replaceable HEPA filter
    Independent venting system
    Air Filtration Replaceable HEPA medium
    Power Requirements With a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC):
    EU: 230 VAC, 7.5 A (dedicated circuit)
    US: 120 VAC, 15 A (dedicated circuit)
    With a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC):
    EU: 230 VAC, 10 A (dedicated circuit)
    US: 120 VAC, 20 A (dedicated circuit)
    Vacuum Requirements Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)
    Connectivity Wi-Fi (2.4 GHz)
    Ethernet (1000 Mbit)
    USB 2.0
    Ethernet Connectivity RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port
    Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.
    Wi-Fi Connectivity Protocol: IEEE 802.11 b/g/n
    Frequency: 2.4 GHz
    Supported security: WPA/WPA2
    USB Connectivity USB (rev 2.0) B port with a USB A-B cable
    Sound Emission Does not exceed 76.5 dB(A)
    Fuse Sift Control Interactive touchscreen, physical buttons
    Included Accessories Large Brush
    Small Brush x 2
    Pipe Cleaners
    Dental Picks
    Gloves
    Dust Mask
    Safety Glasses
    Vacuum Brush Tool
    Vacuum Crevice Tool
    Lifting Straps

    Formlabs 3D Printers and Production Solutions

    Want To Know More?

    Our team of 3D printing professionals are just an email or a phone call away.

    contact us

    Phone

    03 9687 8638

    Address

    7A Kent St,
    Yarraville, VIC 3013
    Australia.

    Send a Message


      (Accepted filetypes: pdf,jpg,jpeg,png & gif. Max file size: 5mb)