Products and Services Used


Nika Holding produces mats based on a method that is impossible without scanning. Computer processing of the data ensures a perfect fit of a pattern to the automobile surface.

Nika Holding is a manufacturer of automotive accessories. The company has been in the automotive accessories market for about 2 years, engaged in production of floor mats for trunks and interiors. During this period many leading car makers, such as Nissan, Skoda, Renault, Peugeot, have become clients.

Nika Holding produces mats based on a method that is impossible without scanning. Computer processing of the data ensures a perfect fit of a pattern to the automobile surface. After researching the market for existing technologies, the company tried the M Model scanner made by Artec.

“In choosing this particular model, we knew we needed a rather compact device so that it would be easy to scan with it in the tight confines of a car interior. Also, the scanner would often be used in production in conditions where the sturdiness of the casing would be especially important,” comments an employee at Nika Holding.

This is how the process of making mats works:

  1. An order to produce mats is received from a car maker.
  2. A company employee goes out to the car showroom, where he scans the car interior.Scanning the interior of an automobile is not easy, since the space in a salon is rather tight and dark. Therefore, to obtain an acceptable result, about 6 scans are done from various angles. Scan time is 15 minutes. The ease of capturing depends on the upholstery material. Bright interiors scan more quickly and easily, while digitizing dark, especially black, nappy surfaces takes longer.
  3. To obtain a high quality model of a trunk interior about 20 scans are done. Scanning takes about 30 minutes.
  4. Data is processed in Artec Studio, and models are exported in a commonly used format and used as a template for sketches in other software.
  5. After that a CNC turns out a semi-finished matrix out of Medium Density Fiberboard (MDF).
  6. Then the semi-finished material is further processed until it is ready.
  7. The next stage is forming. A polymer sheet is vacuum-formed by a special device to create the finished product.
  8. The final stage is “cosmetic” detailing – trimming (removing burr) and packaging, after which the product is sent to the customer.

The technological process based on 3D scanning of a car salon is much easier and faster,” says the chief technologist of Nika Holding. Traditionally one has to take all the measurements with a tape measure, and for reliability you would have to repeat each measurement many times. 3D scanning makes it possible to automate all measurements and immediately obtain an accurate computer model that is ready to be sent to the machine which produces the form.”

An employee of Nika says the main advantages of working with Artec are the noncontact and rapid scanning of automobile interiors and trunks, the user-friendly interface of the Artec Studio 8.0 software, and the ease and simplicity of using the devices themselves.

Nika employees say they would like to see a Start button added to the scanner itself. Also, without a handle it is somewhat difficult to hold the scanner in the tight space of a car salon. Artec is constantly striving to improve its products. In their new models, which are in development, they have added a Start button, and the body has been re-shaped so that it is easier to hold during scanning.

Other Engineering Case Studies

  • 3D Scanning Stories | Individual customizing of automobiles
    Since the company began using the 3D scanner, the time from creation of the design to approval...
    Read More
  • 3D Scanning Stories | Automotive accessories
    Nika Holding produces mats based on a method that is impossible without scanning. Computer processing of the...
    Read More
  • Reverse Engineering Stories | Reverse engineering of compressor's 3D model
    A compressor 3D scanned with Artec Space Spider is reverse engineered in 3D Systems' Geomagic Design X
    Read More
  • 3D Scanning Stories | Scanning a VW bus
    Creating 3D models of large objects is a cakewalk for Artec’s professional-grade 3D scanning solutions. This hippie...
    Read More
  • 3D Scanning Stories | Hyundai Quality Control of Automobile Seats
    Artec scanners are used by Hyundai in perceived quality for scanning automobile seats
    Read More
  • 3D Printing Stories | Display for road wheels
    3D designed & printed wall mounts to display product at Cycles Galleria.
    Read More
  • 3D Printing Stories | Reducing Costs and Lead Time in Manufacturing with Next-Day Custom Jigs
    Pankl Racing Systems have reduced costs and lead time in manufacturing with next-day custom jigs using the...
    Read More
  • Adding 3D Printing to the Machine Shop: Lessons From A&M Tool
    in Engineering Products and Services Used Formlabs Form 2 3D Printing Resins 3D Design Summary Adding 3D...
    Read More